Keywords
Abstract
The article presents ideas about the reliability and durability of belt conveyors in mining enterprises today, as well as the constantly increasing requirements for equipment. In order to increase the service life of the bearing supports of the belt conveyor leading and driven drums, it was found that it is possible to increase the service life of the drums by using rubber bushings on the outer side of the bearing. According to this, the analysis of scientific studies has been carried out that when bushings with belt elements are used in drums, it is possible to increase the UVK compared to the traditional one due to the reduction of the amplitude of vibrations in it.
References
A. Djurayev, A.S. Jumayev. Tasmali konveyerlar konstruksiyalarini takomillashtirish va parametrlarini hisoblashning ilmiy asoslari. Monografiya. Toshkent 2022 yil. 180 bet. ISBN 978 9943 8178 8 3.
A. Djuraev, B.N. Davidbaev, A.S. Jumaev. Improvement of the design of the belt conveyor and scientific basis for calculation of parameters. Global Book Publishing Services is an International Monograph & Textbook Publisher. Copyright 24 may 2022 by GBPS. 10.37547/gbps
ISBN 978 1 957653 03 7 1211 Polk St, Orlando, FL 32805, USA. 151 p.
A.D. Djuraev, A.S. Jumaev. Study the influence of parameters of elastic coupling on the movement nature of support roller and rocker arm crank beam mechanism // International Journal of Advanced Research in Science, Engineering and Technology. Volume 8. No. 9, September 2020.
https://scholar.google.com/scholar?cluster=7335856800375738584&hl=en&oi=scholarr
Akbarjon Jumaev, Fevzi Istablaev, Mehriniso Dustova. Development of the theory of calculation of constructive and rational parameters of belt conveyor roller mechanisms // Cite as: AIP Conference Proceedings 2467, 060025 (2022).
https://pubs.aip.org/aip/acp/article abstract/2467/1/060025/2826524
A. Djuraev, A.S. Jumaev, M.M. Abduraxmanova. Analysis of the results of physical and mechanical experimental studies of the modernized belt conveyor // Journal of Physics: Conference Series 2573 (2023) 012012.
https://iopscience.iop.org/article/10.1088/1742 6596/2573/1/012012
A. Djuraev, A.S. Jumaev, N.I. Ibragimova, M.Y. Turdaliyeva. Analysis of the dynamics of a belt conveyor with composite guide rollers and elastic elements // Journal of Physics: Conference Series 2573 (2023) 012026.
https://iopscience.iop.org/article/10.1088/1742 6596/2573/1/012026
A. Djuraev, Sh.S. Khudaykulov, A.S. Jumaev. Development of the Design and Calculation of Parameters of the Saw Cylinder with an Elastic Bearing Support Jin. International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277 3878, Volume 8 Issue 5, January 2020.
Jumaev Akbarjon Sayfullaevich, Juraev Anvar Juraevich, Juraev Nodirbek Normuradovich, Qayumov Bahodir Babakul o`g`li. Parameters of Choice and Calculation of Materials By The Guiding Composite Roller Mechanisms of Tape Conveyors. International Journal of Engineering and Information Systems (IJEAIS) ISSN: 2643 640X Vol. 4, Issue 8, August 2020, Pages: 235 240.
Jumaev Akbarjon Sayfullaevich, Djuraev Anvar, Abduraxmanova Muattar Musurmankulovna. Analysis of the influence of the properties of oil products on the performance of belt conveyor guide ROLLER MECHANISMS. Har. Edu.a.sci.rev. 0362 8027 Vol.2. Issue 2 Pages 44 52. 10.5281/zenodo.7181271.
A.D. Djuraev, A.S. Jumaev. Study the influence of parameters of elastic coupling on the movement nature of support roller and rocker arm crank beam mechanism. International Journal of Advanced Research in Science, Engineering and Technology. Vol. 6, Issue 6, June 2019. https://scholar.google.com/citations?view_op=view_citation&hl=ru&user=B_J2CkUAAAAJ&citation_for_view=B_J2CkUAAAAJ:8k81kl MbHgC
Jumaev Akbarjon Sayfullaevich. Turdaliyeva Makhliyo Yo'ldoshevna. Ibragimova Nodira Ilkhomovna. Dynamic analysis of machine assembly of belt conveyor with roller mechanisms with composite belt elements. British View ISSN 2041 3963 Volume 7 Issue 3 2022 DOI 10.5281/zenodo.7139012 Universal impact factor 8.528 SJIF 2022: 4.629.
Jumaev Akbarjon Sayfullaevich. Djuraev Anvar Doctor Pushanov Akbar Nurlan oglu. Development of models of recression of defatory states of components as a result of external loads of belt conveyor drums. Har. Edu.a.sci.rev. 0362 8027 Vol.2. Issue 2 Pages 36 43. 10.5281/zenodo.7170607.
Jumaev Akbarjon Sayfullaevich, Ibragimova Nodira Ilkhomovna, Turdaliyeva Makhliyo Yo'ldoshevna. Analysis of vertical and flushing vibration of belt element bearings of belt conveyor roller mechanisms. Academic leadership. ISSN 1533 7812 Vol: 21 Issue 3 http://academicleadership.org/ DOI 10.5281/zenodo.7138635.