Keywords
Abstract
In the article, the determination of the laws of motion of the belt conveyor was considered mainly in the case of vertical positioning. In this case, it is observed that during the transportation of the transported product, the rolling bearings of the roller mechanism with belt elements move as a result of high loading. Based on the analysis of these technological processes, the belt conveyor kinematic scheme and the dynamic model of the machine unit with the roller mechanism of the bearing support of the new construction, consisting of a belt bushing, were created, and the solutions were presented by connecting the calculations from the theoretical side of the conveyor to the graphs.
References
. Веников, В.А. Теория подобия и моделирования. М.: Высш. шк.,1984. 439 с.
. Седов, Л.М. Методы подобия и размерности в механике. М.: Наука, 1987. 432 с.
. Смирнов В.К. Сопротивление движению ленты от шевеления материала при проходе роликов / В.К.Смирнов, И.А.Шпакунов // – В кн.: Горнорудные машины и автоматика. М.: Недра, 1966, вып. П. с.228-235.
. Джураев А., Турдалиев В.М., Бобоматов А.Х., Холтураев Х.П. Разработка конструкций и методы расчета параметров колеблющихся сеток. Монография. Изд. LAP Lambert Academic Publishing, Deutschland/ 2016. -с. 157. [5]. Тимашенко С.П., Янч Д.Х., Утвер У. Колебания в инженерном деле. Москва. «Машиностроение» 1985. -с.472.
. Mamatova D., Джураев А. The basis of theoretical parameters in belt drive with variable transmission ratio International Journal of Advanced Research in Science, Engineering and Technology Vol.5, Issue 9, September 2018 p. 6770-6777.
. A.Djurayev, A.S.Jumayev. Tasmali konveyerlar konstruksiyalarini takomillashtirish va parametrlarini hisoblashning ilmiy asoslari / Monografiya. «HUMO PRINT 2020» MCHJga qarashli matbaa bo`limi. – Navoiy. 2022. – 53 b.
. A.Djuraev, B.N.Davidbаev, A.S.Jumaev. Improvement of the design of the belt conveyor and scientific basis for calculation of parameters / Global Book Publishing Services is an International Monograph & Textbook Publisher. Copyright 2022 by GBPS. All rights reserved.
. A.Dj.Djuraev, A.S.Jumaev. Study the influence of parameters of elastic coupling on the movement nature of support roller and rocker arm crank beam mechanism. International Journal of Advanced Research in Science, Engineering and Technology (IJARSET) //ISSN: 2350-0328 Vol. 6, Issue 6, June 2019, 9795 – 9800.
. A.Djuraev, A.S.Jumaev. Providing the Development of New Designs for the Design of the Roller Mechanism Transmitting Rotational Motion in Belt Conveyors. International Journal of Emerging Trends in Engineering Research (IJETER) // ISSN 2347–3983 Volume-8. No.9, September 2020. 6609 – 6617.
. A.S.Jumaev, A.J.Juraev, N.N.Juraev, B.B.Qayumov. Рarameters of choice and calculation of materials by the guiding composite roller mechanisms of tape conveyors. International Journal of Engineering and Information Systems (IJEAIS) // ISSN: 2643-640X, Vol. 4, Issue 8, August – 2020. 235 – 240.